Correct Burner Position; Boiler Plate; Flame Tube Length - FBR GAS XP60/2CE EVO Manual De Instalación, Uso Y Mantenimiento

GB

CORRECT BURNER POSITION

Fig. 5
Burner position

BOILER PLATE

Fig. 6
Boiler plate
MODEL
GAS XP60/2CE EVO

FLAME TUBE LENGTH

Flame tube length must be selected based on the specifications supplied by boiler manufacturer and, in any case, it
must be greater than the thickness of the boiler door included its insulation.
In case of boilers with flame inversion or front flue combustion chambers, it is necessary to insulate the area between
the flame tube and front door with refractory material. This protection material must not impede flame tube extraction.
MODEL
GAS XP60/2CE EVO
** For different flame lengths, please contact our Technical-Sales Department.
GAS XP60/2CE EVO
INSTALLATION
L min L *
mm 160 160
TC TL **
mm 250 335
The burner is designed to work only in the positions as
shown in the picture.
Any other position could compromise the correct working
of the burner.
Crossed positions are forbidden for safety reasons.
* Suggested dimension of connection between burner
and generator.
L max M
180 M10
071011_2_A
N min N * N max
205 205 226
9