Customer Responsibilities - Craftsman 919.763010 Manual Del Propietário

CUSTOMER RESPONSIBILITIES TABLE
MAINTENANCE TASK
PRESSURE WASHER
Check/clean inlet screen.
Check high pressure hose.
Check soap and chemical hose and 1liter
Check gun and wand for leaks.
Purge pump ofair and contaminants
Check pump oil
Change pump oil
Before each use
X
X
X
X
X
x
Every 25 Every 50 Every 100
hours or yearly hours or yearly hours or yearly
X
ENGINE
Check oil level
Change engine oil
x
Product Specifications
Pressure Washer Specifications
Pressure 3000 I
Flow Rate 3.0 GPM
Cleaning Units (psi x GPM) 9000
Engine Specifications
RPM 3600
Rated Horsepower 9.0
Spark Plug 0.030" (0,76mm)
Gasoline Capacity 7 Gallon
Oil SAE 30 weight
General Recommendations
The warranty of the high pressure washer does not
cover items that have been subjected to operator
abuse or negligence. To receive full value from the
warranty, operator must maintain high pressure
washer as instructed in this manual.
Some adjustments will need to be made period-
ocally to maintain your high pressure washer.
All adjustments in the Maintenance section of this
manual should be make at least once each season.
Once a year you should clean or replace the spark
plug and clean or replace the air filter and check
the gun and wand assembly for wear. A clean
spark plug and clean air filter assure proper
fuel-air mixture and help your engine run better
and last longer.
NOTE: Over time the o-rings in the gun assembly
become worn. Attach to your owners manual is a set
of repiacememt o-ring and split backup ring.
11