Operating Procedure - Ransomes LH Serie Manual De Seguridad, Funcionamiento Y Mantenimiento

7 OPERATION

7.2 OPERATING PROCEDURE _____________________________________________

1. Do not operate with loose, damaged or missing components. Whenever possible mow when grass is dry
2. First mow in a test area to become thoroughly familiar with the operation of the controls.
3. Study the area to determine the best and safest operating procedure. Consider the height of the grass,
type of terrain, and condition of the surface. Each condition will require certain adjustments or precautions.
4. Never direct discharge of material toward bystanders, nor allow anyone near the machine while in
operation. The owner/operator is responsible for injuries inflicted to bystanders and/or damage to their
property.
5. Use discretion when mowing near gravel areas (roadway, parking areas, cart paths, etc.). Stones
discharged from the implement may cause serious injuries to bystanders and/or damage the equipment.
6. Disengage the cutter motors and raise the implements when crossing paths or roads. Look out for traffic.
7. Stop and inspect the equipment for damage immediately after striking an obstruction or if the machine
begins to vibrate abnormally. Have the equipment repaired before resuming operation.
10. Do not operate with loose, damaged or missing components.
en-22
CAUTION
To Help Prevent Injury, Always Wear
Safety Glasses, Leather Work Shoes Or
Boots, A Hard Hat And Ear Protection.
CAUTION
Remove All Debris From The Site Before
Mowing. Enter A New Area Cautiously
Always Operate At Speeds That Allow
You To Have Complete Control Of The
Mower.
CAUTION
Before You Clean, Adjust, Or Repair
This Equipment, Always Disengage All
Drives, Lower Implements To The
Ground, Engage Tractor Parking Brake,
Stop Engine And Remove Key From
Ignition Switch To Prevent Injuries.