Cutting Cylinder Drive - Ransomes LH Serie Manual De Seguridad, Funcionamiento Y Mantenimiento

6 CONTROLS
6.1

CUTTING CYLINDER DRIVE

This lever (D) positioned at the rear of the operator,
on the right hand side above the pump gearbox,
controls forward and reverse drive to the cylinders.
To operate:
(a) Pull the lever forward (F) for forward drive for
grass cutting.
(b) Push the lever rearward (R) for reverse drive
for backlapping or clearing of cylinders.
(c) When drive is not required the lever should be
in the neutral (N) position.
en-20