Machine Specification; Hydraulic Specification - Ransomes LH Serie Manual De Seguridad, Funcionamiento Y Mantenimiento

4 SPECIFICATION

4.2 MACHINE SPECIFICATION ______________________________________________

Frame construction:
Cutting unit drive:
Transmission:
Tractor Requirements:
Minimum Tractor Power:

4.3 HYDRAULIC SPECIFICATION ____________________________________________

Description
Cutting
Forward
Reverse
en-12
Type Welded and bolted hollow box section frame; cutting cylinder drive control
lever for forward and reverse backlapping
Fixed displacement hydraulic motors.
PTO from tractor to gearbox mounted on main frame, through hydraulic pump to
hydraulic valve then to cutting unit hydraulic motors.
Lift System Attaches to tractors with category 1 or 2 three point linkage. Standard
1.38 in. diameter, 6-spline 540 rpm PTO shaft
22.4 kW
Liters / Minute.
29
29
Relief Valve Pressure
210bar
210bar