Removing A Cooling Fan - Dell EMC PowerEdge R230 El Manual Del Propietario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Figure 47. Installing a cooling fan blank
Next step
Follow the procedure listed in the After working inside your system section.

Removing a cooling fan

Prerequisites
NOTE:
The procedure for removing each fan is identical.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your system section.
3
Remove the cooling shroud.
4
If required, remove the cooling shroud.
Steps
1
Disconnect the power cable from the power connector on the system board by pressing the sides of the power cable.
2
Lift the fan out of the cooling fan bracket.
Instalación y extracción de los componentes del sistema
95
Tabla de contenido
loading

Este manual también es adecuado para:

E33s serie

Tabla de contenido