Unidad de fuente
Especificación
de alimentación
1039 BTU/h como máximo (fuente de alimentación de 250 W)
Tensión
100–240 V CA, autoajustable, 50/60 Hz
Storage controller specifications
Storage
Specification
controller
Storage controller
PERC H730, PERC H330, PERC H830, PERC S130.
type
Especificaciones de la unidad
Hard drives
The PowerEdge R230 system supports SAS, SATA, Nearline SAS hard drives and Solid State Drives (SSDs).
Drives
Specification
Four hard drive
Up to four 3.5-inch cabled hard drives, or
systems
Up to four 2.5-inch hot swappable SATA, or Nearline SAS hard drives in 3.5-inch adapters, or
Up to four 3.5-inch hot swappable SATA, or Nearline SAS hard drives
Two hard drive
Up to two 3.5-inch cabled hard drives
systems
Optical drive
The PowerEdge R230 system supports one optional slim SATA DVD-ROM drive or DVD+/-RW drive.
Especificaciones de puertos y conectores
USB ports
The PowerEdge R230 system supports:
NOTA:
Este sistema ha sido diseñado también para que se conecte a sistemas de alimentación de TI con
un voltaje entre fases no superior a 230 V.
NOTE:
Your system supports software RAID S130 and a PERC card.
For more information on software RAID, see the Dell PowerEdge RAID Controller (PERC) documentation at
Dell.com/storagecontrollermanuals.
NOTE:
The upgrade from embedded controller or Software RAID controller to Hardware RAID controller
is not supported.
Especificaciones técnicas
29