Installing The Optional Idrac Port Card - Dell EMC PowerEdge R230 El Manual Del Propietario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Installing the optional iDRAC port card

Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1
Ensure that you follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your system section.
3
Keep the Phillips #2 screwdriver ready.
4
Remove the cooling shroud.
Steps
1
Align and insert the tabs on the iDRAC port card into the slots on the chassis.
2
Insert the iDRAC port card into the connector on the system board.
3
Tighten the screw that secures the iDRAC port card holder to the system board.
Figure 61. Installing the iDRAC port card
1
screw
3
iDRAC port card board
5
tabs on the iDRAC port
2
iDRAC port
4
SD vFlash media card slot
6
slots on the chassis
Instalación y extracción de los componentes del sistema
109
Tabla de contenido
loading

Este manual también es adecuado para:

E33s serie

Tabla de contenido