Installing The Cooling Fan Blank - Dell EMC PowerEdge R230 El Manual Del Propietario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Figure 46. Removing a cooling fan blank
1
cooling fan blank (2)
3
tab
Next steps
1
Install the cooling fan.
2
Follow the procedure listed in the After working inside your system section.

Installing the cooling fan blank

Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE:
The procedure for removing each cooling fan blank is identical.
1
Follow the safety guidelines listed in Safety instructions section.
2
Follow the procedure listed in the Before working inside your system section.
Steps
1
Lower the cooling fan blank into the cooling fan bracket.
2
Insert the tabs on the cooling fan blanks into the slots on the cooling fan bracket.
3
Press the cooling fan blank until it clicks into place.
94
Instalación y extracción de los componentes del sistema
2
cooling fan bracket
4
release tab (2)
Tabla de contenido
loading

Este manual también es adecuado para:

E33s serie

Tabla de contenido