Removing The Expansion Card Riser - Dell EMC PowerEdge R230 El Manual Del Propietario

Prioridad de las tarjetas
6
7
8
9
10
11
12
13
14
15
16

Removing the expansion card riser

Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
3 Disconnect the PERC card LED cable.
NOTE: This step is applicable only to the cabled hard drive systems.
Steps
1 Lift and rotate the expansion card riser latch to open it.
2 Holding the touch points, lift the expansion card riser from the riser connector on the system board.
100 Instalación y extracción de los componentes del sistema
Tipo de tarjeta
PERC H830 (bajo perfil)
NIC de 1 Gb (altura
completa)
NIC de 1 Gb (bajo perfil)
NIC de 1 Gb (Broadcom
de cuatro puertos)
NIC de 1 Gb (Broadcom
de bajo perfil)
1 Gb NIC (Intel de dos
puertos)
NIC de 1 Gb (puerto Intel
dual, perfil bajo)
1 Gb NIC (Broadcom de
dos puertos)
NIC de 1 Gb (Broadcom
de dos puertos, perfil
bajo)
SAS de 12 Gb (altura
completa)
SAS de 12 Gb (bajo perfil) 1
Prioridad de las ranuras
1
2
1
2
1
2
1
2
1
2
Máximo permitido
1
1
1
1
1
1
1
1
1
1
1