hilmor 1950536 Instrucciones De Operacion Y Mantenimiento página 5

DANGER: RISK OF EXPLOSION OR FIRE
WHAT CAN HAPPEN
If electrical sparks from this machine come
into contact with flammable vapors, they may
Restricting air flow through the machine end
Unattended operation of this product could
result in personal injury or property damage.
To reduce the risk of fire, do not allow the
DANGER: RISK TO BREATHING (Asphyxiation)
WHAT CAN HAPPEN
Improper use of this machine, accessories or
use of damaged accessories such as hoses,
could cause a refrigerant leak. Refrigerant is
not safe for breathing. Breathing refrigerant
WARNING: RISK OF BURSTING
Recovery Cylinder: Use only DOT CFR 49 approved recovery cylinders. Review all warnings
and DOT requirements before using the recovery cylinder. Recovery cylinders do not have
infinite life. Cylinder life is dependent on several factors, some of which include operating
conditions, ambient conditions, proper installation, field modifications, and the level of
Improper operating, setup and maintenance procedures can cause the unexpected
rupture of a cylinder, allowing pressurized refrigerant to suddenly and forcefully
escape posing a risk of injury to consumers.
The US Department of transportation requires that refrigerant recovery cylinders be
re-qualified periodically. Refer to and follow cylinder labeling, markings and US DOT
WARNING: To avoid the potential of a recovery cylinder bursting always follow
the manufacturer's safety instructions and warnings on overfilling and re-
qualification of your cylinder. Serious injury or death can occur from a burst
HOW TO PREVENT IT
Store flammable materials in a secure
Never place objects against or on top of
Operate this machine in an open area at
least 12" (30.5 cm) away from any wall or
obstruction that would restrict the flow of
Operate this machine in a clean, dry, well
Always remain in attendance with the product
HOW TO PREVENT IT
Before operation, ensure the machine and
all accessories including in-line filter, hoses,
ball valves, manifold, and recovery cylinder,
are connected properly and are in good
Work in an area with good cross ventilation.
Read and follow the safety instructions
provided on the label or safety data sheets for
ENGLISH
5 5