Over Fill Protection; Best Practices; Technical Specifications - hilmor 1950536 Instrucciones De Operacion Y Mantenimiento

OVER FILL PROTECTION

• The machine is equipped with over fill protection capabilities which can be used in
• Always use a scale as the primary method to verify a recovery cylinder is not overfilled.

BEST PRACTICES

•
• High cylinder temperatures slows down recovery. To keep the recovery cylinder cool:
–
–
• To reduce restrictions and speed up recovery:
–
– Remove depressors from all hoses.
–
•
• When recovering liquid, throttle the valve to reduce likelihood of slugging
• Mark each recovery cylinder with type and quantity of refrigerant recovered to avoid
mixing of refrigerants. This is especially important for burnout recoveries, which may
• Quick disconnect, low loss fittings restrict flow and will slow refrigerant recovery.
• For dirty systems, such as burnouts, use a dedicated manifold, hose set and inlet
•
TECHNICAL SPECIFICATIONS
Model
Motor
Motor Speed
Power Cord Spec
Power
Compressor
Operating Temperature
Dimensions
Net Weight
Ingress Protection
Compliance
Warranty
1950536
Brushless DC, 1 HP
3000 RPM
115V, 60Hz
Oil-less, Air-cooled, Dual Piston
32 °F to 104 °F (0 °C to 40 °C)
14.7" x 14.2" x 10.6" (37.4 cm x 36. cm x 27 cm)
27 lbs (12.25 kg)
IP24
CSA safety certification for the US and Canada
FCC
AHRI740-1998 UL verified
Limited 1 year
ENGLISH
15 15