If Configuration - Televes Avant 5 Manual De Instrucciones

User instructions
4.- IF CONFIGURATION menu
The next menu is IF Configuration:
- Allow to select the editable values of the menu such as Attenuation, Equalization or LNB configuration.
- (short press) - Places the cursor on attenuation, equalization or LNB configuration.
- (long press) - Enters the extended menu.
- (short press) - Changes to the VHF Configuration menu
- (long press) - Saving and adjustment
Procedure
Press the button to activate (blinks) the option -IF Attenuation-. Use
between the possible values -- (OFF), 0dB, ...., 24dB.
FI Config
Att: 0dB
EQ: 0dB
LNB: 0V/--
Then press the button to access to the following option of the menu -IF Equalization-. You will be able to select a
value of equalization in the IF band between the values: 0dB (minimum) and 12dB (maximum).
FI Config
Att: 9dB
EQ: 0dB
LNB: 0V/--
Then press the button to enter the following option of the menu -LNB Configuration-. You will be able to configure
the powering of the LNB: 13V (vertical polarization), 17V (horizontal polarization) or 0V (no powering). Finally press the
to access to the last option of the menu, where you will be allowed to indicate if the 22KHz tone is ON (high band) or
OFF (low band).
The possible options are: OV/-- (switch OFF), 13V/OFF, 13V/ON, 17V/OFF and 17V/ON.
FI Config
Att: 9dB
EQ: 10dB
LNB: 0V/--
Example:
FI Config
Att: 7dB
IF Attenuation of 7 dB and equalization of 3 dB.
EQ: 3dB
LNB configured at 13V with tone.
LNB: 13V/ON
FI Config
Att: 0dB
EQ: 0dB
LNB: 0V/--
FI Config
Att: 9dB
EQ: 10dB
LNB: 0V/--
FI Config
Att: 9dB
EQ: 10dB
LNB: 13V/--
43
buttons to select the desired value
FI Config
Att: 9dB
EQ: 0dB
LNB: 0V/--
FI Config
Att: 9dB
EQ: 10dB
LNB: 13V/OFF
"Avant 5"
FI Config
Att: 9dB
EQ: 10dB
LNB: 13V/ON