Tabla de contenido
Idiomas disponibles
Idiomas disponibles
M a n u a l d e u s u a r i o • U s e r 's m a n u a l
NO WELD OUTPUT; HIGH TEMPERATURE
LIGHT ON
Welder overheated. Allow unit to cool with the
fan on.
Duty cycle or amps too high. Reduce duty cycle
or amps.
Airflow is blocked. Clean vents and fan out with
compressed air.
ERRATIC OR IMPROPER ARC OR WELDING
OUTPUT
Bad weld connections. Clean and tighten weld
connections.
Polarity incorrect. Connect polarity correctly.
Workpiece painted or dirty. Clean workpiece
thoroughly.
Ceramic Nozzle obstructed by welding spatter.
Clean or replace nozzle.
FAN NOT OPERATING
Fan blocked/dirty. Remove obstruction and
clean with compressed air.
Fan broken. Have the fan replaced by a quali-
fied service technician.
MAIN SUPPLY FUSE SHUTS OFF FREQUENTLY
Circuit Breaker rating is too low. Install a circuit
breaker rated for greater than 20 Amps.
19
Tabla de contenido
