Tabla de contenido
Idiomas disponibles
Idiomas disponibles
17o
OBJECT AND LIQUID ENTRY - Never push objects of any kind into
this apparatus
through
openings
as they may touch dangerous
voltage points or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the apparatus.
'/8_ SERVICING - Do not attempt to service this apparatus
yourself as
opening
or removing
covers may expose you to dangerous
voltage
or other hazards, Refer all servicing
to qualified
service personnel.
19o DAMAGE REQUIRING SERVICE - Unplug this apparatus
from the
wall outlet and refer servicing
to qualified
service personnel
under
the following
conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the apparatus,
c. If the apparatus
has been exposed to rain or water,
d, If the apparatus
does not operate normally
by following
the
operating
instructions,
Adjust only those controls that are
covered by the operating
instructions,
as improper
adjustment
of other controls may result in damage and will often require
extensive work by a qualified technician
to restore the apparatus
to its normal operation,
e. If the apparatus
has been dropped
or damaged
in any way,
f, When the apparatus
exhibits a distinct
change in performance,
this indicates a need for service,
20° REPLACEMENT PARTS - When replacement
parts are required,
be
sure the service technician
uses replacement
parts specified
by
the manufacturer
that have the same characteristics
as the original
part, Unauthorized
substitutions
may result in fire, electric shock,
injury to persons or other hazards.
21o SAFETY CHECK - Upon completion
of any service or repairs to this
apparatus,
ask the service technician
to perform
routine safety
checks to determine
that the apparatus
is in proper operating
condition,
22° HEAT- This apparatus
product should be situated away from heat
sources such as radiators, heat registers, stoves, or other products
(including
amplifiers)
that produce
heat.
(_) LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.
CAUTION:
ATTENTION:
FCC WARNING
To prevent
electric
shock, match wide blade of plug to wide slot, fully insert.
Pour _viter les chocs _lectriques,
introduire
la lame la plus large de la fiche dans la borne
correspondante
de la prise et pousser jusqu'au
fond.
This apparatus may generate or use radio frequency energy. Changes or modifications
to this apparatus may
cause harmful interference
unless the modifications
are expressly approved
in the manual. The user could
lose the authority to operate this apparatus if an unauthorized
change or modification
is made.
RADIO-TV
INTERFERENCE
ii:_?i
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference
in a residential installation.
This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference
will not
occur in a particular installation.
If this apparatus does cause harmful interference to radio or television
reception, which can be
determined
by turning
the apparatus off and on, the user is encouraged to try to correct the interference
by one or more of the
following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between
the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different
from that to which the receiver is connected.
4) Consult the dealer or an experienced
radio/TV technician
for help.
This Class B digital
apparatus
complies with Canadian
ICES-OO3•
Cet appareil
num_rique
de la classe B est conforme
_ la norme NMB-O03
du Canada•
Note
to CATV system
installer:
I
I
This reminder
is provided
to call
the CATV system
installer's
attention
to Article
820-40
of the NEC that
provides
guidelines
I
for proper
grounding
and,
in particular,
specifies
that
the cable
ground
should
be connected
to the grounding
system
of the
building
as close to the point
of cable
entry
as practical.
LOCATION
AND
HANDLING
• Do not install the unit in direct
sunlight,
near strong
magnetic
fields, or in a place subject
to dust or strong
vibration.
• Avoid
a place with
drastic
temperature
changes.
• Install the unit in a horizontal
position.
Do not place anything
directly
on top or bottom
of the unit. Depending
on your
external
devices,
noise or disturbance
of the picture
and/or
sound
may be generated
if the unit is placed
too close to them.
In this case, please ensure
enough
space between
the external
devices
and the unit
• Depending
on the environment,
the temperature
of this unit may increase slightly.
This is not a malfunction.
... ..
i.............
il i i!!i_ii
TO AVOID
THE HAZARDS
OF ELECTRICAL
SHOCK
AND
FIRE
• Do not handle the power cord with
wet hands.
• Do not pull on the power
cord when disconnecting
it from an AC outlet.
Grasp it by the plug.
• Do not put your
fingers or objects
into the unit.
NOTE
ABOUT
RECYCLING
• This unit's packaging
materials
are recyclable and can be reused. Please dispose
of any materials
in accordance
with
your local recycling regulations.
• Batteries
should
never be thrown
away or incinerated
but disposed
of in accordance
with
your local regulations
concerning
chemical
wastes.
EN
Tabla de contenido
