Front Glass Installation - Dimplex BLF5051 Manual Del Propietário

Fireplace Installation
electric shock or injury to persons,
always use a licensed electrician.
WARNING: Ensure that the
circuit on which the fireplace is to
be installed has the power cut off
at the service panel until installa-
tion is complete.
3. Lift fireplace and insert into
opening. The fireplace's
mounting trim should be flush
against the wall (Figure 13).
4. Use bubble level (supplied) to
level the fireplace within the
framing. Adjust as required.
5. Drive four supplied mount-
ing screws through the four
mounting holes located on the
inside surface of the fireplace
Figure 13
Wall
surface
Mounting hole
Mounting hole
chassis, into wall studs (Figure
13).
6. Refer to Front Glass Installa-
tion section for final installation
procedures.

Front Glass Installation

1. Evenly distribute supplied
glass rock on the front tray of
the fireplace (Figure 14).
2. Carefully mount front glass as-
sembly so that the front glass
hooks (4) hang on the front
glass mounts on the fireplace
(4) (Figure 15).
3. Use the supplied two Phillips
sheet metal screws to fasten
the glass assembly tabs to the
Figure 14
Front glass
assembly
Front tray
15