Oster FPSTFP4263-DFL Guia Del Usuario página 5

How to Chop Using the Large Work Bowl
NOTE: Make sure the unit is turned OFF and unplugged before use. Never use
hand to push food into processor. Do not use the processor continuously for more
than 3 minutes at a time.
1 Lock the large bowl onto base.
(See "How to assemble the large bowl")
2 Grasp the chopping blade by its stem and
slide it onto the center post
(Figure 9).
3 Place food into bowl.
4 Lock cover onto bowl.
(See "How to Lock the cover")
5 Lock the Food Chute Lid.
(See "How to Lock the Food Chute Lid").
6 Plug the cord into an electric outlet.
Use the Food Guide to prepare food
for chopping.
7 Press the Chop or Shred button for continuous processing or the PULSE button
for short processing tasks. When using the PULSE setting, hold the PULSE
button for about 2-3 seconds at a time, check results and repeat if desired.
8 When fi nished processing, press the Off button and allow the chopping blade
to stop rotating.
9 Twist the cover towards the UNLOCK
10 Hold the Chopping Blade by its stem and remove. Unlock the bowl by turning it
clockwise towards the UNLOCK
NOTE: Chopping Blade is very sharp, use caution when handling.
www.oster.com
8
FPSTFP4263-DFL_11ESM1.indd 8-9 FPSTFP4263-DFL_11ESM1.indd 8-9
Figure 9
mark to remove lid.
mark, and lift off . Empty the processed food.
How to Chop Using the Small Work Bowl
(Do not use slice/shred disc with small work bowl.)
NOTE: Make sure the unit is turned OFF and unplugged before use. Never use
hand to push food into processor. Do not use the processor continuously for more
than 3 minutes at a time.
1 Lock the large bowl onto base.
(See "How to assemble the large bowl")
2 Insert Small work bowl into large work bowl and twist inner bowl until it is
seated into the large work bowl.
3 Grasp the small chopping blade by its stem and slide it onto the center post.
4 Place food into bowl.
5 Lock cover onto bowl. (See "How to Lock the cover")
6 Lock the Food Chute Lid. (See "How to Lock the Food Chute Lid").
7 Plug the cord into an electric outlet.
8 Press the Chop or Shred button for continuous processing or
the PULSE button for short processing tasks. When using the PULSE setting,
hold the PULSE button for about 2-3 seconds at a time, check results and
repeat is desired.
9 When fi nished processing, press the Off button and allow the chopping blade
to stop rotating.
10 Twist the Lid towards the UNLOCK
11 Hold the Chopping Blade by its stem and remove. Lift small work bowl out of
the larger work bowl. Empty processed food.
NOTE: When using chopping blade use slower speeds to control size of chopped
food. Chopping Blade is very sharp, use caution when handling.
www.oster.com
mark to remove.
9
11/9/11 10:08 AM 11/9/11 10:08 AM