Switching To Favourite Channel; Deleting All Favourite Channels (Del All); The Timer Function (Timer); Sleep Timer - Silvercrest SFB 10.1 C3 Manual De Instrucciones

Switching to favourite channel

Press the
sequence. Once you reach the last saved favourite channel, the selection
starts again from the beginning.

Deleting all favourite channels (DEL ALL)

It is only possible to delete all favourite channels at once. Individual
favourite channels cannot be deleted but they can be overwritten.
1. Press the device button for the device that you wish to program.
2. Press and hold the
3. Press
4. Press
The display reads "SURE DELET".
5. Press
"SETUP". Next you can program more favourite channels or exit the
menu.
Press to go back one menu level. To return to the start window,
press one of the device buttons.

The timer function (TIMER)

SLEEP TIMER

This feature lets you set a delay time after which a selected device will
switch off.
1. Press the device button for the device that you wish to program.
2. Press and hold the
3. Press
4. Press
The display reads "SET TIMER" and suggests a delay time of 30. The
first digit flashes.
5. Use the number buttons to enter a value between 01 and 99
minutes. Press
then "SLEEP TIMER".
6. When the sleep timer is programmed, the
left of the display.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Event timers (TIMER 1....TIMER 4)
The remote control includes 4 event timers that allow the remote control to
send a preset command sequence at a set time.
1. Press and hold the
2. Press
display reads "SLEEP TIMER".
3. Press
"TIMER4" and press
The first two digits representing the hour flash. Here, you set the time
at which you want the command sequence to be sent.
button once or more to switch your favourite channels in
, select "FAV CH" and press
, select "DELETE ALL" and press
to confirm. The display reads "DELETED" and then
, select "TIMER" and press
, select "SLEEP TIMER" and press
to confirm. The display reads "SUCCESS" and
, select "TIMER" and press
, select a desired timer from "TIMER1" to
to confirm. The display shows a 4-digit time.
button for at least 3 seconds.
button for at least 3 seconds.
button for at least 3 seconds.
SilverCrest SFB 10.1 C3
to confirm.
to confirm.
to confirm.
to confirm.
icon appears on the
to confirm. The
English - 87