Digital Control Unit / Control Panel; Controlling Combustion - Palazzetti SPHERA IDRO Manual De Instalación, Uso Y Mantenimiento

Ocultar thumbs Ver también para SPHERA IDRO:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

8.3

DIGITAL CONTROL UNIT / CONTROL PANEL

(OPTIONAL)
switch is on the ON position.
The central unit must never be switched off when the
the embers have died.
In the event of a power outage, do not turn on and/
or reload the stove.
8.4
FIRE LIGHTING:
completely open the primary air adjustment (- 8.2 - :
turn to right);
an automatic system tends to keep the door closed;
carefully place the wood pieces inside the combustion
chamber;
slightly close the air vent only when proper grill base
is ensured.
Never use alcohol, benzene, kerosene or other liquid fuels
8.5
KEEPING THE FIRE
materials must be placed at a distance of at least 80 cm
from the radiation surface (glass sides of the hearth).
INSTALLATION
8.6

CONTROLLING COMBUSTION

The combustion takes place inserting in the grill air
adjusted by the knob placed in the technical compartment
below the door (- 8.2 -):
Turn the adjuster to RIGHT, to speed up the
combustion;
Turn the adjuster to LEFT to slow down the combustion.
is advisable to completely the primary air to the grate.
based on heating needs or how long you want the load
of wood to last.
During stove operation you can favour the glass cleaning
using the glass cleaning air adjustment lever (-8.3 -).
By adjusting it to left you allow the entry of a greater
preventing the deposits of soot and ash.
To access the glass cleaning air adjustment lever you
have to open the stove door.
For the correct setting of the air, at nominal power, refer to
the instructions contained in the technical characteristics
of the model. Do not exceed the maximum recommended
load of wood.
.
- 8.2 -
- 8.3 -
Tabla de contenido
loading

Tabla de contenido