Urmet Sinthesi S2 Manual De Referencia página 29

column
interface
ID = n
2Voice
power supply
BUTTON CONFIGURATION FOR SPECIAL FUNCTION
It is possible to configure a button for a special function, for example to turn the stairs lights on.
To configure the button, perform as follows:
• Go to advanced configuration.
• Keep the selected button pressed for 3 seconds, the door unit emits an acoustic signal to confirm that
the acquisition has been successfully performed.
PROGRAMMING DATA DELETING
To delete all the data programmed in the advanced configuration, follow the instructions below:
• Go to advanced configuration.
• Keep any button pressed for 5 seconds at least. The door unit emits a first acoustic signal after 3 seconds
and another one longer after 2 seconds, to confirm the deleting.
DS1083-056A
"B"
Secondary call module with 8 buttons
ID = n AUX dip 2 = 1
offset = 11
Called users: from 11 to 18
Secondary call module with 11 buttons
ID = n AUX dip 2 = 0
offset = 0
Called users: from 0 to 10
"A"