Urmet Sinthesi S2 Manual De Referencia página 27

Example:
• System with 3 columns, the first with 4
users, the second with 6 users and the
third with 8 users.
• Access advanced configuration.
• Set the ID dip-switch to 0.
• Press the upper button of the door unit
(first button).
• Set the ID dip-switch to 1.
• Press third button of the first button
module (fifth button) to associate user 0
of column 1 in this manner.
• Set the ID dip-switch to .
• Press first button of the third button
module (eleventh button) to associate
user 0 of column  in this manner.
• Reset the ID dip-switch in start position.
• Quit advanced configuration mode.
DS1083-056A
The final configuration will be:
Column
0 start
4 USERS
OUTPUT
The configuration of column 0 is not required
if the default settings of the door unit are
maintained because all buttons are assigned to
this column.
Repeat the operation on all the main door units.
Column Column
1 start 2 start
6 USERS 8 USERS
P5÷P8
P9÷P12
1083/17 (1)
P1÷P4
P13÷P16
7