Connecting Multiple Projectors - Sony VPL-X2000U Manual De Instalación

Connection Examples

Connecting Multiple Projectors

Following are examples of multiple projectors installed
onto the optional SU-PJ2000 projector stand, such as by
stacking.
When not using the switcher
Install the optional IFB-12A interface board in the first
projector.
Set the IN/OUT switch on the IFB-12A to OUT.
For details on the IFB-12A interface board, refer to the
operating instructions supplied with it.
IFB-12A
IN/OUT switch: OUT
SIC-10 connecting cable
(5BNC ˜ 5BNC)
(not supplied)
42
(GB)
For details on the SU-PJ2000 projector stand, refer to the
installation manual supplied with it.
Installing the interface board and setting up the switch
must be done while the power of the projector is off.
Computer
INPUT C INPUT B
INPUT A VIDEO
+
–
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
0
Video
cable
(not
RCC-5G/10G/30G
supplied)
connecting cable
(not supplied)
INPUT C INPUT B
INPUT A VIDEO
+
–
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
0
Note
VCR, etc.
Device index
number: 01
Rear
AC power cord
to AC IN
(supplied)
Attach the
supplied
terminator.
Device index
number: 02
Rear
AC power cord
to AC IN
(supplied)
Attach the
supplied
terminator.
to a wall outlet
Signal flow
:
to a wall outlet