Setting The Index Numbers - Sony VPL-X2000U Manual De Instalación

Setting the Index Numbers

To set the group index number
To set the device index number
When you connect multiple projectors in your system, you have to set the
group index and device index numbers for each projector.
If you set the same group index number for multiple projectors, you can
operate multiple projectors and switchers simultaneously (such as input
selection) by designating the number.
The group index number can be set in the menu.
For group index number setting, see page 56 (GB).
If you set the device index number, you can control each projector
individually with the supplied Remote Commander.
The device index number can be set with the DEVICE INDEX switches on
the rear of the projector. It is set to "01" at the factory.
If only one projector is connected, set it to "01."
Ten's digit
Notes
• Do not set the same device index number for the projectors in the same
system.
• Do not set the number to "00." If you do, the projector will be operated
only with the keys on the control panel. It cannot be controlled with the
wired or wireless Remote Commander, or with an external equipment to
which the PJ COM connectors are connected.
Unit's digit
0
45
(GB)