Error Code; Error Description - Foster 7380645 Manual De Instalacion Y Uso

SAFETY FUNCTIONS AND ERROR DISPLAY
During the warranty period, only a service center authorized by the manufacturer may carry out any repairs.
•
Before making any repairs, make sure the appliance is disconnected from the power mains either by removing the fuse
•
or by disconnecting the power plug from the wall outlet.
Unauthorized tampering with and repairs of the kitchen range (cooking hob) can result in electric shock or short circuit; •
hence, do not attempt to perform any repairs by yourselves. Leave such tasks to an expert or an authorized service unit.
In case of minor faults or problems with the appliance operation, check the following instructions to see whether you can
•
eliminate the causes by yourselves.
Elimination of any errors or warranty claims that resulted from improper connection or use of the appliance is not covered
•
by our warranty. In such cases, the costs of repair are borne by the user.

ERROR CODE

Permanent use of sensors; Control unit cuts
off after 10 sec. Water or cooking utensils on
the glass above the control unit..
NO error!
L
Child.lock activated
Inappropriated pan
Incorrect cooling fan operation
E8
Inappropriated pan
E3
Excessive overheating of hob
E2
Er21
Er22
Er20
Er36
Er31
Er47
Er40
Contact authorized center for technical assistance, specifying the error code.
EA
EH
U400
E4
E5
E6
E7
E9

ERROR DESCRIPTION

Cleaning of the operational surface. If the problem
persists, Contact authorized center for technical
assistance, specifying the error code
Deactivate child-lock
Use appropriate pan. If the problem remains
Contact authorized center for technical assistance
- specify the error code.
Air exhaust blocked, for example by paper.
Or fan defective
Contact authorized center for technical assistance,
specifying the error code.
Use appropriate pan. If the problem remains
Contact authorized center for technical assistance
Do not heat empty pans.
Use appropriate pots for induction.
Let the hob cool down.
If the problem persists, contact the authorized
technical assistance center, specifying the error
code.
36
REMEDY