Safety Notes; Functional Description; Intended Use; Product Features - Bosch PLL 360 Manual Original

OBJ_BUCH-979-002.book Page 11 Wednesday, December 9, 2009 12:50 PM

Safety Notes

en
Working safely with the measuring
tool is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. Never make warning labels
on the measuring tool unrecognisable. SAVE
THESE INSTRUCTIONS.
Caution – The use of other operating or ad-
justing equipment or the application of oth-
er processing methods than those men-
tioned here, can lead to dangerous
radiation exposure.
The measuring tool is delivered with a warn-
ing label in German language (marked with
the number 4 in the representation of the
measuring tool on the graphic page).
Before putting into operation for the first
time, attach the supplied sticker in your
national language over the German warning
label.
Do not direct the laser beam at persons
or animals and do not stare into the laser
beam yourself. This measuring tool produces
laser class 2 laser radiation according to
IEC 60825-1. This can lead to persons being
blinded.
Do not use the laser viewing glasses as
safety goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
Bosch Power Tools
Do not allow children to use the laser meas-
uring tool without supervision. They could
unintentionally blind other persons or them-
selves.
Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which
may ignite the dust or fumes.

Functional Description

Intended Use

The measuring tool is intended for determining
and checking horizontal and vertical lines.
The measuring tool is suitable exclusively for
operation in enclosed working sites.

Product Features

The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Exit opening for laser beam
2 On/Off switch
3 Tripod mount 1/4"
4 Laser warning label
5 Battery lid
6 Latch of battery lid
7 Button for switching off the automatic
levelling
8 Operating mode button
9 Levelling warning indicator
10 Operating-mode indication
11 Working without automatic levelling indicator
12 Universal holder
13 Rotary knob of the universal holder
14 Holding plate of the universal holder
15 Base plate of the universal holder
16 1/4" screw of the universal holder
17 Tripod*
18 Protective pouch
19 Laser viewing glasses*
* The accessories illustrated or described are not
included as standard delivery.
1 609 929 T98 | (9.12.09)

English | 11