Orbegozo PA 4350 Manual De Intrucciones página 14

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

PA 4350
OPERATION GUDELINES
NOTE: Before using Popcorn Maker for the first time, we recommend you clean the unit
following the instructions under CARE AND CLEANING.
§ Remove the transparent cover from the main body.
§ Using the measuring spoon provided, measure one level spoon of popping corn and place it into
the main chamber. One measuring spoon of kernels will make approximately 3 cups of popped corn.
Do not use more than one spoon of corn in your Popcorn Maker at once. NEVER PLACE BUTTER,
OIL OR SALT IN THE POPPING CHAMBER.
§ Reposition the transparent cover so it sits firmly on the body of the unit.
§ Place the measuring spoon in position on the top of the transparent cover.
§ Place a large bowl beneath the Popcorn Makers chute to catch the popped corn.
§ Inset the plug into an AC220-240V, 50Hz power outlet and switch the power on.
§ Turn the ON/OFF switch to the ON position.
§ The Popped corn will shoot out the chamber and into the bowl.
CAUTION: Do not touch the popcorn maker cover during or immediately after operation. The unit
will be extremely hot.
Do not operate the popcorn maker for more than 5 minutes at a time. Allow a 10 minutes break
between cooking a second cycle of popped corn. This will allow the units motor to cool down.
When the rate of popping becomes less than about 1 per second, turn the ON/OFF switch to the
OFF position. Allow the unit to cool for at least 2 minutes before removing the transparent cover.
We recommend oven mitts are used to remove the cover. Due to variations in the kernels, you
may find not all kernels have popped.
Ensure the appliance is turned off after use. Allow to cool before re-using, cleaning or storing.
Helpful hints:
This product uses hot air circulation in the popping chamber to pop the kernels. To avoid
damaged to your Popcorn Maker, never add butter, oil or any other substance to the popping
chamber.
Never use microwave popcorn in your Popcorn Maker.
Use only fresh popcorn kernels. Old or stale kernels may cause scorching or smoking during
operation.
Take care when selecting the bowl for catching your popcorn.
A metal bowl may become hot, exercise caution when moving the bowl.
-
If using a plastic bowl, ensure it can withstand the heated air which flows from the Popcorn
-
Maker while in use.
CARE AND CLEANING
Turn the Popcorn Maker's ON/OFF switch to the OFF position and ensure it is unplugged
14
Tabla de contenido
loading

Tabla de contenido