Climatic Classes; Ambient Temperature; Installation; Site - Nevir NVR-4496 CTNFS Manual De Instrucciones

2. Climatic classes

Look at chap. T
ECHNICAL
class of your appliance. Your appliance can be operated in rooms
with relevant room temperatures as named below.
CLIMATIC CLASS
SN
N
ST
T

3. Installation

3.1 Site

1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. Completely remove the transport-protection (adhesive tape) of the
accessories. Be very careful and do not use any aggressive or abrasive
detergents to remove residuals of the transport-protection.
3. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on alevel, dry and solid floor. Check the correct
installation with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is situated inside the appliance or at the back.
D for information about the climatic
ATA

AMBIENT TEMPERATURE

0 0
+10 →+32 C
0 0
+16 →+32 C
0 0
+16 →+38 C
0 0
+16 →+43 C
e.g. unheated cellar
inner home
temperature
inner home
temperature
inner home
temperature