Limit Switch, External Receiver Connections - SEA USER 2-24V DG Manual Del Usuario

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
Limit switch
If not connected they don't have to be bridged.
For the limit switch function the presence of the limit switches in
both closing and opening is necessary. In case of single leaves
it is not necessary to bridge the limit switch of the motor 2.
It is possible to activate the function anti-intrusion. Limit switch,
that if released, forces the motor to re-close.
! !
For the right function of the limit switches there
must be a corrsipondence between the direction of
movement of the motors and the respective occupied limit
switches.
Com = Common
C = Contact
Opening
Limit Switch M1
Closing
Limit Switch M1
N.C.
Opening
Limit Switch M2
Closing
Limit Switch M2
CN2
5 6 13
6
5
67410756
®
LIMIT SWITCH
N.C.
N.C.
N.C.
EXTERNAL RECEIVER
CN1
12 11 10 9 8 7
English
1 2 3 4 5 6 7 8 9
5
1
5
2
5
3
5
4
6 5 4 3 2 1
2
3
4
REV 04 - 03/2013
USER 2 - 24V DG
CN2
Example: Connection of a
radio receiver
For the connection of the
receiver refer to the relative
instructions manual.
35