Security Settings - Nokia 6102i Manual Del Usuario

W e b
Module PIN request
using services provided by the security module. Enter the code, and select
On. To disable the module PIN request, select Off.
Change module PIN
module. Enter the current module PIN code, then enter the new code twice.
Change signing PIN
signature. Select the signing PIN you want to change. Enter the current
PIN code, then the new code twice.
See also "Access codes," p. 9.
Certificates
Important: Note that even if the use of certificates makes the risks
involved in remote connections and software installation considerably
smaller, they must be used correctly in order to benefit from increased
security. The existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct, authentic, or
trusted certificates for increased security to be available. Certificates
have a restricted lifetime. If Expired certificate or Certificate not valid
yet is shown even if the certificate should be valid, check that the
current date and time in your device are correct.
Before changing any certificate settings, you must make sure that you
really trust the owner of the certificate and that the certificate really
belongs to the listed owner.
There are three kinds of certificates: server certificates, authority
certificates, and user certificates. You may receive these certificates
from your service provider. Authority certificates and user certificates
may also be saved in the security module by the service provider.
To view the list of the authority or user certificates downloaded into
your phone, select
Authority certificates
The security indicator
transmission between the phone and the content server is encrypted.
The security icon does not indicate that the data transmission between the gateway
and the content server (or place where the requested resource is stored) is secure.
The service provider secures the data transmission between the gateway and the
content server.
64
— to set the phone to ask for the module PIN when
— to change the module PIN, if allowed by the security
— to change the signing PIN code for the digital
Menu > Web > Settings
or User certificates.
is displayed during a connection, if the data
>

Security settings

>