Pipettor Programming; The Program Menu; Mode Selection - 3M Pipettor II Manual De Instrucciones

6. PIPETToR PRoGRaMMInG

6.1 The Program Menu

1. Preset 3M Petrifilm Plate Dilution Modes
Dilution
Mode Ratio
d1 1:5
d2 1:10
d3 1:20
d4 1:5
d5 1:10
2. Repeat Dispense 1 mL Mode
This mode performs repeat 1 mL dispensing.
Mode Volume
rd 1.00 mL
3. Pipette Modes
These modes perform standard 1 mL and 5 mL pipetting with blow-out.
Mode Volume
P1 1.00 mL
P5 5.00 mL
4. Open Dilution Mode
This mode allows selection of any dilution ratio within the range of the pipettor.
Diluent
Volume
Mode Range
d0 0.10-5.00 mL

6.2 Mode Selection

Selecting available modes (d1, d2, d3, d4, d5, rd, P1, P5, d0) on the pipettor is done with use of these two keys:
1. Press Start-button once to activate the pipettor.
2. Press the Arrow up/down-button
modes available.
3. Press Enter-key when the desired mode is displayed. This will enter the mode selection and allows you to use this mode.
or or may not be used in the middle of the aspiration or dispensing cycle.
Diluent sample
Volume Volume
4.00 mL 1.00 mL
4.50 mL 0.50 mL
4.75 mL 0.25 mL
0.80 mL 0.20 mL
0.90 mL 0.10 mL
Repetitions
1-5
sample
Volume
Range Increment
0.00-4.90 mL 0.05 mL
Arrow up/down-key
repeatedly to view each of the
Total
Volume
5.00 mL
5.00 mL
5.00 mL
1.00 mL
1.00 mL
Max. Total Volume
5.00 mL
Enter-key
d l
5.00 mL
5
SPEED
OUT
6
(English)