Storing The Machine; Technical Regulations; Contacting The Dealer; Almacenamiento De La Máquina - Casadei F114/L Manual De Uso

Tabla de contenido

1.1.1 STORING THE MACHINE

If the machine is to be stored for a certain
period of time, before being installed in the
workshop, make sure the storage palce is
covered and not exposed to any harmful
environmental influence. The machine must be
stored in a dry place even if is adeguately
packed. Keeping the machine in places exposed
to weathering may cause serious problems
when the machine is put into operation.

1.2 TECHNICAL REGULATIONS

The machine was designed in accordance with
the following regulatinos:
- EN 60204-1 for electric parts
- EN 292-1 EN 292-2 for safety of the machine
- EN 848-1 for the safety devices to be
installed and procedures to be followed in the
use of routers which work from under the
table.

1.3 - CONTACTING THE DEALER

When writing to or calling your nearest
Dealer for any reason regarding the
machine, always quote the following:
• Machine model
• Serial number
• Year of manufacture
• Date of purchase
• Service life and number of operational
hours
• Detailed information about the job done
and any faults found.
1.1.1 ALMACENAMIENTO DE LA
MAQUINA
Si es necesario almacenar la máquina antes
de instalarla definitivamente en el taller,
controlar que el lugar esté cubierto por una
marquesina.
Aunque la máquina está protegida por un
embalaje adecuado conviene colocarla en un
lugar seco. La permanencia por mucho tiempo
en un lugar sin protección puede afectar su
buen funcionamiento.

1.2 REFERENCIA A LAS NORMAS

La máquina ha sido proyectada de acuerdo
con las siguientes normas:
- EN 60204-1 por lo que se refiere a la parte
eléctrica.
- EN 292-1 EN 292-2 por lo que se refiere
a la seguridad de la máquina.
- EN 848-1 ,para nociones y conceptos de
seguridad de las fresadoras verticales
inferiores.

1.3 - ENVIO DE CORRESPONDENCIA

Si se debiese escribir o llamar por teléfono
al concesionario de zona debido a cualquier
motirvo relacionado con la máquina es
necesrio
suministrar
informaciones siguientes:
• modelo de la máquina
• número de matrícula
• año de construcción
• fecha de adquisición
• periodo de empleo: número de horas de
servicio
• noticias detalladas sobre el trabajo o e
eventual defecto.
– 5 –
siempre
las
Tabla de contenido
loading

Este manual también es adecuado para:

F115/lF114t/lF115t/lF115c

Tabla de contenido