Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Total Restaurant Supply - https://totalsupply1.com - Toll Free 1-800-944-9304 - Local 507-288-9454
Step 1
After floor sections are in place and fully
locked together, apply approximately
1/8" bead of sealant to the interior metal,
3/8" in from the ramp cut out. Also apply
approximately 1/8" bead of sealant to the
center of the exterior metal lip.
SEALANT
27
i
nTeRioR
2940 Hwy 14 W, Rochester, MN 55901
Interior Ramp Installation Instructions
R
i
amP
nsTallaTion
Step 2
Place ramp into position by lining up the pre-
drilled holes in the ramp with the pre-drilled
in the interior floor then secure the ramp into
the floor with the #8 x 1/2" screws provided.
Step 3
Install non-skid floor fabric 6" x 24" Non-skid
applied to cover ramp base and back seam of
ramp to floor 3" x 24" non skid applied to cover
side seam of ramp base to floor.
Apply sealant where the door section meets the
interior and exterior of the floor panel and ramp.
Also, apply sealant under the door threshold.
© 2014 Nor-Lake, Inc 10/14 Rev. G 132617
i
nsTRucTions
Tabla de contenido
