Total Restaurant Supply - https://totalsupply1.com - Toll Free 1-800-944-9304 - Local 507-288-9454
W
-i
i
alk
n
nsTallaTion
W
-I
I
ALK
N
NSTALLATION
THRESHOLd ATTACHMENT
The threshold was attached at the factory to the lower portion of the door section and it is positioned
in such a manner that no adjustment is required. It must, however, be attached to the building floor
to complete the installation.
IMPORTANT! Make sure that the slam braces are securely fastened to the door section and to the
building floor before attaching the threshold to the building floor. Both edges of the threshold should
be attached with fasteners that are appropriate for the building floor and, since the floor surfaces
vary so greatly in composition, no fasteners are provided and should be obtained by others (Fig. 12).
24
-d
/d
s
ooR
ooR
ecTion
2940 Hwy 14 W, Rochester, MN 55901
-D
/D
S
OOR
OOR
ECTION
APPLY SEALANT UNDER THRESHOLD
Fig. 11
Apply Sealant Under Threshold
Fig. 12
IMPORTANT!
MAKE
SURE
THAT
THE
DOOR/DOOR
SECTION
IS
PERFECTLY PLUMB BEFORE
ATTACHING
THE
SLAM
BRACES TO THE FLOOR.
Note: Add sealant between
threshold and floor to seal.
© 2014 Nor-Lake, Inc 10/14 Rev. G 132617