Preliminary Inspection; Handling And Storage; Applications; Working Limits - Lowara TKS Serie Instrucciones De Uso E Instalación

English
1. Overview
The purpose of this manual is to provide the necessary information for proper installation, operation
and maintenance of the TEKNOSPEED converter connected to a LOWARA electric pump.
Read this manual before using the product.
Improper use may cause personal injury and damage to property, and lead to the forfeiture of the
warranty coverage.
For information regarding the electric pumps, refer to the relevant manuals.
The instructions and warnings provided below concern the standard version.
Please refer to the sale contract for any modifications or special version characteristics.
Always specify the exact model identification code and construction number when requesting technical
information or spare parts from our Sales and Service department.
For instructions, situations or events not considered in this manual or in the sale documents, please con-
tact our Service Center nearest you.

2. Preliminary Inspection

2.1 Visual Inspection
Upon delivery, check the integrity of the packaging.
If the packaging is damaged, unpack the product and inspect it visually to make sure it has suffered no
damage during transport.
Should the product be damaged, inform our dealer within 8 days from delivery.

2.2 Handling and Storage

The product is delivered in a cardboard box or wooden case. During transport and storage, protect it
from humidity, heat sources and possible mechanical damage (impacts, falls, etc). Lift and handle the
product carefully using suitable hoisting equipment.
Refer to chapter 4 for further information.

3. Applications

The TKS system consists of a three-phase electric pump, the TEKNOSPEED single-phase converter and
an electronic pressure transmitter (also known as pressure sensor).
The TEKNOSPEED single-phase converter is suitable for the control of a three-phase electric pump ac-
cording to the conditions described in this manual and the supply voltage / frequency specified in the ra-
ting plate.
The converter controls the operation of the pump in order to ensure a constant delivery pressure based
on the signal received from the electronic pressure transmitter.
The TKS system can be used for domestic water supply, irrigation and pressure boosting applications.
For further information refer to chapter 12.

4. Working Limits

For storage :
• Ambient temperature: -5°C to +40°C .
For operation :
For information regarding electric pumps refer to the relevant manuals.
« Translation of the original instructions »
en
19