Tabla de contenido
Notes on the Media (xD-Picture Card and Microdrives)
I Image Memory Card
h This Image Memory Card is a new image recording
media (xD-Picture Card) developed for digital
cameras. The Image Memory Card consists of a
semiconductor memory (NAND-type flash memory) to
record digital image data.
The recording process is electrically performed and
enables erasure of existing image data as well as re-
recording of new image data.
h When using a new Memory Card, or a Memory Card
that has been initialized by a PC, be sure to initialize
(format/initialize) the card with your digital camera
before using it.
I Microdrives
Microdrives are compact, lightweight hard disk drives
that conform to the CF+ Type II standard. Due to their
ample capacity for large image data files and their low
per-megabyte recording cost, Microdrives provide a
more economical way to save high-resolution image
files.
I Storing Data
In the situations listed below, recorded data may be
erased (destroyed). Please note that FUJIFILM accepts
no responsibility whatsoever for the loss (destruction) of
recorded data.
✽ When the media is used incorrectly by the owner or a
third party
✽ When the media is exposed to static electricity or
electrical noise
✽ When the media is removed or the camera is switched
off during data recording or erasing (media formatting)
✽ When the media is bent, dropped or otherwise
subjected to a strong force or impact
You should always back up important files onto
another media (MO disk, CD-R, CD-RW, hard
disk, etc.).
I General Notes on Handling Media (all types)
h When inserting the media into the camera, hold the
media straight as you push it in.
h Never remove the media or switch the camera off
during data recording or erasing (media formatting) as
this could result in damage to the media.
h Data storage media are precision electronic devices.
Do not bend, drop or otherwise subject the media to
strong force or shocks.
h Do not use or store these media in environments
likely to be affected by strong static electricity or
electrical noise.
h Do not use or store media in locations subject to high
temperatures and humidity or in environments where
they are exposed to corrosive substances.
I Notes on Handling xD-Picture Card
h Keep xD-Picture Cards out of the reach of small
children. When storing xD-Picture Cards, ensure that
they are kept in a location out of the reach of small
children to prevent a card being accidentally
swallowed. An xD-Picture Card could cause
suffocation if accidentally swallowed. If a child
swallows an xD-Picture Card, seek medical advice
immediately.
h Make sure that the memory card is straight when you
insert into the camera etc.
h The memory card is a precision electronic instrument.
Do not apply pressure or shock, and avoid bending.
h Do not use the memory card in a hot, humid, or
corrosive environment.
h If the contact area on the card is soiled (dust,
fingerprints, etc.), wipe it clean with a soft, dry cloth.
h Clean the memory card with a soft dry piece of cloth
SU-340(S)流用
when dirty.
h When you carry or store it, always keep the card in
the anti-static case provided. Use a storage case if
available.
h The memory card can be used reliably for a long
period of time, but will eventually lose its ability to
store and play back image data. At this point, replace
with a new memory card.
h Never remove the xD-Picture Card or switch the
camera off during data recording, during data erasing
(xD-Picture Card formatting) or during frame advance
when images are being played back. These actions
could result in damage to the xD-Picture Card.
h The use of xD-Picture Cards is recommended with
the FinePix M603.
The camera quality cannot be guaranteed when cards
other than those manufactured by FUJIFILM are
used.
h The xD-Picture Card may feel warm when it is
removed from the camera after extended periods of
picture taking or image viewing. This is normal and
does not indicate a fault.
h Do not affix labels to the xD-Picture Card.
This could result in the label peeling off and causing a
fault when the card is inserted or removed.
I Notas sobre el uso de Microdrives
h No escriba sobre la etiqueta de los Microdrives.
h No despegue la etiqueta de los Microdrives.
h No pegue otras etiquetas sobre los Microdrives.
h Durante el transporte y almacenamiento de los
Microdrives, manténgalos siempre en el estuche
protector que se suministra.
h No utilice los Microdrives en ranuras CF+ tipo II que
no cuenten con una función de eyección.
h Tenga cuidado al manejar Microdrives que hayan
sido utilizados durante largos períodos de tiempo ya
que pueden estar muy calientes.
h No coloque los Microdrives cerca de fuertes campos
magnéticos.
h Mantenga los Microdrives siempre secos.
h No ejerza fuertes presiones sobre la tapa de los
Microdrives.
I Notas sobre cómo usar los soportes de
grabación con un ordenador
h Si intenta hacer fotos con un soporte de grabación
que ha sido utilizado previamente en un ordenador
personal, primero formatee el soporte de grabación
en su cámara.
h Cuando formatee un soporte de grabación en la
cámara y luego haga fotos y grabe las imágenes, se
creará automáticamente una carpeta en el soporte de
grabación. Los datos de la imagen se grabarán luego
en esta carpeta.
h No cambie o borre los nombres de las carpetas ni de
los archivos en el soporte de grabación usado en el
ordenador, ya que esto imposibilitará utilizarlos en la
cámara.
h Use siempre la cámara para borrar los datos de la
imagen en el soporte de grabación.
h Para editar los datos de las imágenes, cópielos en el
disco duro de su ordenador y luego edite la
información copiada.
I Especificaciones de las tarjetas xD-Picture Card
Tipo
Memory type
Condiciones de
funcionamiento
Dimensiones
Tarjeta de memoria de imagen para
cámaras digitales (xD-Picture Card)
NAND-type flash memory
Temperatura : 0°C a + 40°C
Humedad : 80% o menos (sin
condensación)
25 mm × 20 mm × 2,2 mm
(an × al × grosor)
79
Tabla de contenido
