Starting A Cold Engine; Starting A Warm Engine - Malaguti DRAKON 50 Manuel Du Propriétaire

OPERATION AND IMPORTANT RIDING POINTS

STARTING A COLD ENGINE

1. Turn main switch to "
2. Pull the clutch lever.
When the transmission is in neutral position, the neutral
indicator light should be on, otherwise have an Authorised
MALAGUTI Service Centre check the electrical circuit.
3. Operate the choke if necessary, and fully close the throttle grip.
4. Press the START button to run the engine.
5. After the engine has started, move the choke lever back half-
way.
5
For maximum engine life, never accelerate hard when
the engine is cold.
6. When the engine is warm, turn the choke off.
The engine is warm when it responds normally to the
throttle with the choke turned off.
26
".

STARTING A WARM ENGINE

To start a warm engine, the choke is not required.
Before using the vehicle for the first time, read the En-
gine break-in section.
ENGLISH