Electrical Connection; Connector S32/Cable; Connector S115 - Balluff BTL7-P511-M-P-S32/S115/KA Serie Manual De Instrucciones

BTL7-P511 -M _ _ _ _ -P-S32/S115/KA_ _
Micropulse Transducer in a Profile Housing
4
Installation and connection (continued)
4.4

Electrical connection

Depending on the model, the electrical connection is made
using a cable or a connector.
The connection or pin assignments for the respective
version can be found in Tab. 4-3 to Tab. 4-4.
Note the information on shielding and cable
routing on page 12.
4.4.1

Connector S32/cable

Pin Cable color
1
YE yellow
2
GY gray
3
PK pink
4
RD red
5
GN green
6
BU blue
7
BN brown
8
WH white
Unassigned leads can be connected to the GND on the controller side
1)
but not to the shield.
Tab. 4-3: Connection assignments
Fig. 4-9: Pin assignment of S32 (view from above on transducer),
8-pin M16 circular plug
www.balluff.com
Interface
BTL7-P511...-S32
+Init
+Start/stop
–Init
Not used
1)
–Start/Stop
GND
10...30 V
Not used
1)
4.4.2

Connector S115

Pin Interface
BTL7-P511...-S115
1 +Init
2 +Start/stop
3 –Init
4 Not used
1)
5 –Start/Stop
6 GND
7 10...30 V
8 Not used
1)
1) Unassigned leads can be connected to the GND on the controller side
but not to the shield.
Tab. 4-4: Connection assignments
Fig. 4-10: Pin assignment of S115 (view from above on transducer),
8-pin M12 circular plug
english 11