Maintenance - EdilKamin LAGUNA M 25 Instalación Uso Y Mantenimiento

• Maintenance and inspections carried out to
standard and with regular intervals as well
as only using original spare parts are fun-
damental for correct, problem and anomaly-
free operation, guaranteeing a long boiler
life.
• Maintenance is compulsory and must be
regularly carried out periodically.
• Maintenance and inspections not carried
out can cause damage to property and peo-
ple.
• The inspection is necessary to determine
the actual status of the boiler and compare
it with the original status.
• Maintenance is necessary to bring the
boiler to the original conditions status.
• As a result, maintenance should involve
cleaning, setting or replacing worn parts.
• At the end of each heating season, you
need to inspect the boiler to maintain the
characteristics and efficiency of the entire
system unchanged.
• After each cleaning procedure, the boiler
must be checked to ensure everything
moved or removed during maintenance is
correctly re-positioned.
• At the end of each season, you are advised
to carry out in-depth cleaning of the boiler
since the mineral ash can be a corrosive
agent and reduce boiler reliability.
• You are advised to empty the pellets from
the auger to avoid humidity absorption risk-
ing loading tube blockage.

MAINTENANCE

AUTOMATIC CLEANING
The boiler is equipped with an automatic clean-
ing system for the crucible. Cleaning takes
place on each switch-on or periodically after a
certain number of hours during operation.
• When the system starts, a timer counts equal
to 6 hours.
• When the time is up, if the system is NORMAL
or in MODULATION, it passes to
SWITCH OFF.
• On completion of cleaning, the system must
re-start from the CHECK UP status.
It is also equipped with automatic cleaning of
the smoke exchangers using special stainless
steel tubes.
Crucible and exchanger cleaning takes
place simultaneously.
- 83
-