klover BFM-01 Instalación Uso Y Mantenimiento página 64

HEATING SYSTEM
LOADING COCK
PALLET SIDE FLUE GAS
PASS CLEANING KNOB
RETURN
ATTACHMENT
FLOW CONNECTION WITH
CHECK VALVE
The thermo stove is delivered with the following equipment:

USE, INSTALLATION AND MAINTENANCE GUIDE

1 POWER SUPPLY CABLE;

1 LARGE STRAIGHT BRUSH FOR CLEANING THE FLUE PIPE;

1 WOOD SIDE FLUE GAS PASS CLEANING BRUSH;

1 INFRA-RED REMOTE CONTROL.
CIRCULATION KNOB
BOILER BODY WATER
DRAIN COCK
BOILING
SAFETY VALVE
DISCHARGE
CALIBRATED
CONNECTION
AT 2.5 bar
LEFT UPPER VIEW
AIR INTAKE PIPE
(PELLET SIDE)
ROOM THERMOSTAT
CONNECTION CLAMP
DOMESTIC COLD WATER
INLET (ONLY ON MOD.
WITH SET-UP)
+ SYSTEM LOAD AND
BOILER BODY
4
LOADING COCK
MASTER SWITCH, POWER SUPPLY
CABLE CONNECTION AND TWO
INCORPORATED FUSES (4A 250V)
DOMESTIC HOT WATER
OUTLET (ONLY ON MOD.
WITH SET-UP)
INSPECTION LID
OPENING KNOB
SICURO TOP
BOILER BODY
SECURITY THERMOSTAT
MANUAL RESET
WOOD SIDE
COMBUSTION
REGULATOR