Farelek 112500 Manual De Instrucciones página 57

INSTALLATION
Test
After finishing installation and testing for leaks, you must carry out an After finishing installation and testing for leaks, you must carry out an After finishing installation and testing for leaks, you must carry out an After finishing installation and testing for leaks, you must carry out an
•
operating test
Before this test, check that all the connections have been made correctly. Before this test, check that all the connections have been made correctly. Before this test, check that all the connections have been made correctly. Before this test, check that all the connections have been made correctly.
•
Test procedure with the safety switch (not with the remote control). Test procedure with the safety switch (not with the remote control). Test procedure with the safety switch (not with the remote control). Test procedure with the safety switch (not with the remote control).
•
1. Connect the air conditioner and lift up the front panel. 1. Connect the air conditioner and lift up the front panel. 1. Connect the air conditioner and lift up the front panel. 1. Connect the air conditioner and lift up the front panel.
2. Press on the switch button and then the system operates in test mode. 2. Press on the switch button and then the system operates in test mode. 2. Press on the switch button and then the system operates in test mode. 2. Press on the switch button and then the system operates in test mode.
3. If the pilot lamp lights up for the 3 indicators successively, the system is opera- 3. If the pilot lamp lights up for the 3 indicators successively, the system is opera- 3. If the pilot lamp lights up for the 3 indicators successively, the system is opera- 3. If the pilot lamp lights up for the 3 indicators successively, the system is opera-
ting normally. Otherwise, a flashing light will indicate that the system is not opera- ting normally. Otherwise, a flashing light will indicate that the system is not opera- ting normally. Otherwise, a flashing light will indicate that the system is not opera- ting normally. Otherwise, a flashing light will indicate that the system is not opera-
ting normally. In this case, the system has to be checked. ting normally. In this case, the system has to be checked. ting normally. In this case, the system has to be checked. ting normally. In this case, the system has to be checked.
112500-504-E
.
© FAR GROUP EUROPE 2004
57 24/01/05, 11:38
GB