Farelek 112500 Manual De Instrucciones página 50

Slide the partition
pass tube over the
pipes
N.B. The internal unit is filled with air under pressure. The internal unit is filled with air under pressure. The internal unit is filled with air under pressure. The internal unit is filled with air under pressure.
This air will escape when the caps are taken off. This This air will escape when the caps are taken off. This This air will escape when the caps are taken off. This This air will escape when the caps are taken off. This
does not present a danger, but nonetheless a strong force does not present a danger, but nonetheless a strong force does not present a danger, but nonetheless a strong force does not present a danger, but nonetheless a strong force
is required when unscrewing the screws. TAKE CARE NOT is required when unscrewing the screws. TAKE CARE NOT is required when unscrewing the screws. TAKE CARE NOT is required when unscrewing the screws. TAKE CARE NOT
TO DAMAGE THE PIPES DURING THIS OPERATION. TO DAMAGE THE PIPES DURING THIS OPERATION.
112500-504-E
© FAR GROUP EUROPE 2004
50
Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall. Thread the assembly through the hole in the wall.
Remove the copper caps located at the end of the Remove the copper caps located at the end of the Remove the copper caps located at the end of the Remove the copper caps located at the end of the
internal unit tubes. internal unit tubes.
24/01/05, 11:37
GB
Remove the plastic
cap on the supply cap on the supply
feed side. feed side.