Installation Instructions - Farelek 112500 Manual De Instrucciones

INSTALLATION DIAGRAMS
BEFORE INSTALLATION, INSPECT THE FOLLOWING ACCESSORIES
Accessories for internal unit
1 Fixing plate
2 Vis ST 4x25
3 Extensible sleeve
4 extensible Bolt
5 Batteries
6 Remote Control
7
8 Adiabatic support
9 Alimentation cable
10 Signal Cable
11 Deodorizer Filter
1
Position of the internal unit.
• The refrigerated air must be able to be
diffused to each part of the room.
• The maximum height between the
internal and external units is 5 m.
• Mount on a very stable wall to avoid
vibrations.
• Avoid direct exposure to the sun.
• Make sure there is an easy evacuation
for condensation.
• Do not cause interference with the
remote control signal from a fluorescent
lamp.
• Minimum distance between the air
conditioner and household appliances (TV,
radio etc.): 1 m.
112500-504-E
Qty
1
5
5
2
2
1
Felt 1
1
1
1
1

INSTALLATION INSTRUCTIONS

© FAR GROUP EUROPE 2004
44
Installation accessories
A Pipe of connection
B Bandage plastic
C Attach fixing
D Nail with cement
E Flexible device of flow
condensates
F Open sleeve insulating
G Lid for external mural
opening
H Plastic tube for mural
opening
I Cement
J Sealing oil
2
Position of the external unit.
• Do not obstruct the airflow.
• Make sure that ventilation is adequate,
minimize dust deposits, avoid exposure
to the sun or rain.
• The noise of the apparatus working
or the diffused air will not disturb the
tranquillity of your neighbours.
• Mount the apparatus firmly on its
support so as to reduce the noise and
vibrations.
• Avoid positions close to potential
inflammable gas leaks.
• The unit must be mounted firmly if it
is installed high up.
• The unit must not be subjected to
violent winds.
24/01/05, 11:37
GB
Qty
1
1
3
5
1
1
1
1
1
1