Video Source - NDS Aesculap Manual De Instrucciones

Video Source

Inputs Menu
When the display is powered on Auto Source Select looks at the previously selected video source first. If a signal
is present it is displayed, otherwise Auto Source Select starts scanning the inputs for a signal.
To switch to a different input source, press the INPUT button to open the input menu. The Input menu shows:
selected to the right of the active input. Press the SCROLL button to highlight the desired input. Finally, press the
button to select it.
To select RGBS-VGA* / YPbPr; Scroll to the RGBS-VGA / YPbPr input and press the button to select the
input. Finally, press the button to toggle between RGBS-VGA / YPbPr . The inactive input is grayed out.
*Notes:
1. The display's internal logic determines if an applied signal is RGBS or VGA and configures itself
accordingly.
2. SDI is not available on all EndoVue displays
5