Key; Ignition Block; Steering Lock - Benelli BN 600 GT Manual Usuario

• Switch off the engine with the gear
engaged and when the side stand is
lowered.

KEY

The bike is supplied with four keys for:
- opening the fuel cap

- steering lock

- ignition
- opening the saddle
IMPORTANT:
Always keep duplicate keys separately
from the bike.

IGNITION BLOCK

The key block, in the centre of the vehi-
cle, has two main functions:
" " The engine and lights can function.
The key cannot be removed.
" " The engine and lights cannot function.
The key can be removed.
IMPORTANT:
Never turn the ignition switch in position
while travelling, as this can cause acci-
dents.
It is advisable to apply an anti-freeze
for locks when the temperature reaches
around °0 to prevent the lock protection
hole from freezing.
83
STEERING LOCK
Lock the steering and remove the key
while parked to prevent any unauthor-
ised use of the vehicle.
Locking
1) Turn the handlebar completely to the
left.
2) Insert the key in the ignition.
3) Turn the key anticlockwise, in the "
"position to lock the steering.
NOTE:
To make it easier to engage the steering
lock, move the handlebar slightly while
turning the key.
Remove the key.
IMPORTANT:
After locking, try turning the handlebar
slightly to make sure that the steering is
actually locked.
EN