Kit Includes; Tools Needed; Key Definitions - Petsafe HPA11-10987 Guia De Instalacion

Snap-on Cover
Interior Frame
with Flap
Plastic Core
Covers
Template and
Installation Guide
Exterior Frame
Hex Nuts
- Small 4 pcs.
- Medium 6 pcs.
- Large 10 pcs.
Nylon Screws
- Small 4 pcs.
- Medium 6 pcs.
- Large 10 pcs.
NOTE: The Extreme Weather Pet Door
Installation in thinner or thicker applications may not require the Plastic Core Covers.
If installing in a wall, reduce cut-out width by 1" (25 mm) for the Small and Medium.
For the Large reduce cut-out width by 1" (25 mm) and cut-out height by 1" (25 mm).
Additional tools and materials, such as wood framing, may be required.

Key Definitions

• Outer Frame Size: Overall pet door dimensions
• Cut-Out Size: Dimensions of opening cut in homeowner's door for proper fit and pet door installation
• Replacement Flap Size: Overall flap size when removed from pet door; during extreme changes in
weather, vinyl flaps can shrink during cold months and stretch in warmer months
• Flap Opening Size: Usable flap size for pet to enter and exit through pet door
• Interior Frame: Pet door frame on the inside of home; frame with 2 flaps
• Exterior Frame: Pet door frame on the outside of home
• Insulated Flap: Flap located behind the vinyl flap in the interior frame
• Plastic Core Covers: Plastic pieces that cover the cut-out or "core" of the homeowner's door
• Snap-on Closing Panel: Cover that snaps onto the pet door frame to close the pet door opening
In the box
petsafe.com

Tools Needed

can be installed in most doors and walls.
™
• Hammer
• Jigsaw
• Drill
• ½" (13 mm) Drill Bit
• Wire Cutters
• Slotted & Phillips
Screwdrivers
• Tape Measure
• Masking or Painter's
Tape
• Pencil
• Level
• Scissors
• Safety Equipment
Optional
• Duct Tape
• Caulk
5