Maintenance Position - Riello BG6.1D Instrucciones De Instalación, Uso Y Mantenimiento

5.12 Maintenance position

To access the nozzle carry out the following operations (Fig. 16):
 remove the wires 1) from the control box, the flame sensor
2)(Fig. 16) and loosen the nut 3) from the pump.
 Loosen the screws 4) and extract the nozzle-holder assem-
bly 5) by turning to the right.
 Remove the wires 1) from the electrodes, loosen the screw
3)(Fig. 15), and take the diffuser disc holder assembly 6) out
of the nozzle-holder assembly 5).
 Change the nozzle 7)(Fig. 16), holding the nozzle-holder
with the help of a spanner.
 Screw on the nozzle 7) while holding the nozzle holder still
with a spanner.
 Refit following the operations in the reverse order to the one
described above.
1
2
3
Having put back the nozzle-holder assembly,
screw in the nut 3), as shown in Fig. 17.
WARNING
4
5
9 8 6
5
7
S9668
Installation
TIGHTEN WITHOUT
MOVING TO THE END
D5684
Fig. 16
19
GB
3
Fig. 17
20137240