Alternative Programming Options - Chamberlain KLIK3U Manual De Instrucciones

ALTERNATIVE PROGRAMMING OPTIONS

Alternative programming option for products with a LEARN Button
The LEARN button is typically located on the product or an external receiver. For help locating your LEARN button refer to the Help
section in this manual or contact your product manufacturer.
The images throughout this manual are for reference only and your product may look different.
** LiftMaster, Do-It, Master Mechanic, Raynor, True Value and Sears Craftsman are compatible with Chamberlain technology.
1
Press the program button on the remote control until
the LED turns on.
LED
Program Button
3
Press and release the remote control button...
...8 times (Chamberlain
...3 times (Chamberlain
...2 times (Chamberlain
...4 times (Chamberlain
... 5 or 6 times (Overhead Door
...1 time (Linear
...7 times (Stanley
...9 times (Wayne Dalton
The LED on the remote control must stop blinking between each press of the button. The code is accepted when the product
responds by clicking, blinking, or activating.
4
Press the program button on the remote control to
save.
Program Button
® ** product with yellow LEARN button).
® ** product with purple LEARN button).
® ** product with orange LEARN button).
® ** product with green LEARN button).
® Genie ® Intellicode product).
® Mega-Code product).
® Secure Code product).
® Rolling Code product).
2
Press and release the LEARN button* on your product.
* Depending on your product, the LEARN button may have a different name (use
the button for programming remote controls).
5
Test the remote control by pressing the button. If the
product does not activate, repeat the programming steps.
9