Chamberlain KLIK3U Manual Del Usaurio

MODEL KLIK3U
MODEL KLIK3U-BL
MODEL KLIK3U-PK
UNIVERSAL REMOTE CONTROL
The remote control can be programmed to
activate up to two products, such as a
garage door opener, gate operator, or
commercial door operator. Each button on
the remote control works independently of the other and
must be programmed separately. The images throughout this
manual are for reference only and your product may look
different.
STOP
sensors. The photoelectric sensors are always located on or
near the bottom of the door track.
To prevent possible SERIOUS INJURY or DEATH from a
moving gate or door:
• ALWAYS keep remote controls out of reach of
children. NEVER permit children to operate, or play
with remote control transmitters.
• Activate gate or door ONLY when it can be seen
clearly, is properly adjusted and there are no
obstructions to door travel.
• ALWAYS keep gate or door in sight until completely
closed. NEVER permit anyone to cross path of moving
gate or door.
Read instructions thoroughly BEFORE
beginning. If using the Universal Remote
Control with residential door openers, the remote
control must be used only with door openers
manufactured after 1993 that utilize photoelectric