Optional Accessories - Tripp-Lite SRCOOL2KWM Manual Del Propietário

Installation
Powering the SRCOOL2KWM
Plug the unit into an appropriate power source.
Low Temperature Operation
The SRCOOL2KWM is a high performance cooler, capable of producing very cold air output. When using the unit in environments that are
already cold (20° C / 68° F or less), Tripp Lite recommends using the Dehumidify Mode only. This will allow the unit to continue to provide the
supplemental cooling while preventing any evaporator icing issues caused by the low room temperature.
Magnetic Door Panel Installation (Optional)
1
Open the rack front door.
1

Optional Accessories

Remote Cooling Management
Add remote cooling management to your SRCOOL2KWM with the optional SRCOOLNET2 module. It allows you to communicate with and control
the SRCOOL2KWM as a manageable device on your network and is accessible via Web Browser, Network Management Station or Telnet. With the
SRCOOLNET2 installed, you can:
• Change settings and monitor temperature and humidity from any location
• Receive alerts via e-mail, SMS or SNMP
• Access detailed condition and event logs
Learn more about the SRCOOLNET2 at www.tripplite.com.
2
Cut the magnetic door panel to fit the
shape of the directional vent when it's
attached to the wall-mount rack front
door.
2
8
3
Attach the magnetic door panel to the
inside of the rack front door.
3