Tripp-Lite SRCOOL12K Guia De Inicio Rapido

Owner's Manual Addendum
Portable Air Conditioning Unit
Low Temperature Operation
The SRCOOL12K is a high performance cooler, capable of producing very cold air output. When using the SRCOOL12K in environments that are
already cold (20° C / 68° F or less), Tripp Lite recommends using the Dehumidify Mode only. This will allow the unit to continue to provide the
supplemental cooling while preventing any evaporator icing issues caused by the low room temperature.
Additional Display Error Codes
The Tripp Lite SRCOOL12K has the ability to continually monitor itself. Should an error occur, the display will show one of 5 error codes below:
Error Code Description
E0 Internal Communication Error
E1 Indoor Temperature Sensor Error
E2 Internal Temperature Sensor Error
E3 Refrigerant Error
E4 Water Full
Code E4 can be cleared by emptying the water tank. Consult the owner's manual for details.
For Codes E0, E1, E2, and E3 follow these steps:
1. Power cycle the unit by unplugging it from the source for 5 minutes.
2. Plug the unit back in.
3. Restart the unit.
If the code remains clear, continue to operate the unit as normal. If the code returns, please contact Tripp Lite for further instructions.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
All manuals and user guides at all-guides.com
SRCOOL12K (120 V, 60 Hz)
Copyright © 2013 Tripp Lite.
1